A.2. Get & setup the TFTP server
To get the network boot process operational, you need the TFTP service that
provides the basic file system at boot time. Get Tftpd from
http://tftpd32.jounin.net/.
You must download the latest version in zip format. Unzip it and store it in
your favorite place. Then, you must setup the monster.
Run tftpd32.
Click the Browse button.
Browse to where you put your lifimage, highlight
it and click Ok.
Make sure the IP address below the directory is
the one you gave to your PA-RISC box.
Let tftpd32 open. The tftp server only runs
when the GUI is displayed.
If you want to run it as a NT service, you have to download a
Microsoft™ program. Please refer to the
\
Tftpd32 FAQ.
